Audi 3.0 TFSI Walnut media blasting adapter - image

Files (1)

TFSI_ADAPTER.STL

STL

597.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
TFSI_ADAPTER.STL	Primary model	597.5 KB STL	Slice file	Slice file	Slice file	Ensure a secure attachment point for the shop vac

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Audi 3.0 TFSI Walnut media blasting adapter

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is used for carbon cleaning the intake valves of the 3.0t Audi TFSI motor. If you're here, you know what this is for! Attach a shop vac on the top and blast through the hole. Worked great for my own vehicle. PLEASE read up on the forums about the proper procedure before trying to tackle this job.