Aftermarket radio fascia/frame for Alfa Romeo 147 - image

Files (1)

Alfa_147_Radio_fascia.stl

STL

2.0 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 23%	100% solid	Recommendation
Alfa_147_Radio_fascia.stl	Primary model	2.0 MB STL	Slice file	Slice file	Slice file	Use a higher resolution for less post-print sanding

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Aftermarket radio fascia/frame for Alfa Romeo 147

2 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Summary An aftermarket radio/headunit frame for the Alfa Romeo 147. Originally printed mordr3d's version, however it did not fit my radio, so I remade it with one that does. * WIP currently untested will update when I do. Should fit most aftermarket radios that use a 182*53mm metal bracket. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Extended Rafts: Yes Supports: Yes Resolution: 0.1 Infill: 15-30% Filament: - PLA or ABS - Notes: Would recommend abs due to the higher melting temperature. The higher the resoultion the less sanding you will have to do post printing.