Subwoofer Mount Adapter Ring - Alfa Spider 916 - image

Files (1)

Sub_Speaker_Adapter_v3.stl

STL

302.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Sub_Speaker_Adapter_v3.stl	Primary model	302.7 KB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for a strong bond

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Subwoofer Mount Adapter Ring - Alfa Spider 916

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Drop in Adapter to mount a reasonable 8" Sub into the Alfa Spider 916. Protection cover (Airbag control box) on the Bottom of the trunk needs to be removed. No worries it will be protected by the Sub. Invisible installation, all the original covers will still fit. Use 4 12mm/m5 screws to mount on the car and 4 16mm/m5 to mount the sub in the adapter Happy printing.