Air vents Aérateurs Citroen Jumpy Peugeot Expert Fiat Scudo - image

Files (3)

Grille_aeration_expert.STL

STL

40.9 MB

Grille_aeration_prises.STL

STL

42.8 MB

Loquet_grille_aeration_expert.STL

STL

545.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Grille_aeration_expert.STL	Printable file	40.9 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing and minimal supports
Grille_aeration_prises.STL	Printable file	42.8 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing and minimal supports
Loquet_grille_aeration_expert.STL	Printable file	545.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

Air vents Aérateurs Citroen Jumpy Peugeot Expert Fiat Scudo

0 downloads59 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Ces fichiers permettent de remplacer les aérateurs d'origine des Peugeot Expert Fiat Scudo et Citroen Jumpy de modèles 2007 à 2016. Un des fichiers est un aérateur simple, l'autre est un aérateur équipé de 3 logements pour y monter des prises accessoires, prises USB, interrupteurs, voltmètres... que l'on trouve facilement sur les sites chinois dans les accessoires pour bateaux. Ces deux grilles, au lieu d'être clipsées, reçoivent chacune 2 loquets (latch) serrés avec des vis M4. These files will allow you to replace original airvents of Peugeot Expert Fiat Scudo et Citroen Jumpy from year model 2007 to 2016. One of the files is just a replacement air vent, the other one is a vent which includes housings to receive accessories like accessory 12v plug, USB ports, switches, voltmeter... which can be purchased from chinese webstores in the boat accessory area. Both vents, unlike the original snap-in design, receive 2 latches each, which can be tightened with M4 screws.

Compatible Cars

Citroen Jumpy

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by David FOURNIAUD (Magictuttle) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.