Alfa 159 heated seat control bezel - image

Files (1)

heaterbezel.stl

STL

33.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
heaterbezel.stl	Primary model	33.5 KB STL	Slice file	Slice file	Slice file	Ensure proper fit by enlarging the original hole slightly

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Alfa 159 heated seat control bezel

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A colleague of mine has an Alfa 159 with both of its heated seat controls fallen out of its place because of the broken bezels. Unfortunately, you can only buy the whole control knob, which is not cheap, so he asked me for a 3d print. First we tried an exact copy, but that didn't work very well, because it has very thin walls, so we decided to strengthen the walls, and add them in all four edges. This means that it doesn't fit perfectly into the seat, you must enlarge the original whole slightly, but it's hidden by this bezel anyway. It snaps on the control knob so well, that I was afraid that if I try to remove it, I break the bezel - but then we can always print another:) Fusion 360 design files attached.