wheel_cap_2.stl

STL

5.7 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

65g

Based on 25% main infill across listed model files

Material cost

$1.57

Filament only at roughly $24/kg PETG / ASA

Print time

1.9h–3.1h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
wheel_cap_2.stl	Cover / cap	5.7 MB STL	60g $1.44	65g $1.57	143g $3.43	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Alloy Wheel Centre Cap

0 downloads33 views0 likes

Shared by

Verified

Description

Just simple alloy wheel cap for my RangeRover P38 This is very simple and very strong. May be printed with any filament.

Published Jun 29, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Andrew Chemyakyn (tenchem) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.