Range Rover Classic centre hub cap - image

Files (2)

range_rover_hub_centre.stl

STL

525.5 KB

range_rover_hub_centre_v2.stl

STL

592.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 100%	100% solid	Recommendation
range_rover_hub_centre.stl	Printable file	525.5 KB STL	Slice file	Slice file	Slice file	Verify final orientation and support needs in your slicer
range_rover_hub_centre_v2.stl	Printable file	592.8 KB STL	Slice file	Slice file	Slice file	Verify final orientation and support needs in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Range Rover Classic centre hub cap

0 downloads50 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Centre hub cap for Range Rover Classic alloy wheels, 78mm. The original part number is NCR8254, I believe. It seems to be available, so for originality you should stick with that. The original colour is matt black. Note that this is a simplified design compared to the original, which has a curved outer surface. Prints without support. Use up to 100% infill for strength.