Files (2)

alzorcentercapbackplate.stl

STL

960.8 KB

alzorcentercaptwist.stl

STL

29.7 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
alzorcentercapbackplate.stl	Cover / cap	960.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
alzorcentercaptwist.stl	Cover / cap	29.7 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Alzor 55mm center cap

0 downloads124 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Alzor center caps do not look the best... here are some "twist on" center caps for Alzor wheels, with the old Audi logo in the center. It became difficult to use the typical clips to attach the caps to the wheels as they kept breaking, instead I designed a cap that screws into itself and attaches that way. With some Loctite, these caps stayed in place for a 6+ hour road-trip.