Audi A6 A8 Alloy Wheel Centre Cap 63mm 4D0601170AZ33 - image

Files (3)

tuki1.stl

STL

34.8 KB

tuki2.stl

STL

24.6 KB

vannemerkki.stl

STL

888.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
tuki1.stl	Printable file	34.8 KB STL	Slice file	Slice file	Slice file	Ensure proper alignment using the marks behind the cap
tuki2.stl	Accessory piece	24.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
vannemerkki.stl	Printable file	888.1 KB STL	Slice file	Slice file	Slice file	Ensure proper alignment using the marks behind the cap

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Audi A6 A8 Alloy Wheel Centre Cap 63mm 4D0601170AZ33

0 downloads63 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I was missing one of those caps and remaining ones were worn. Costing about 30 - 50 dollars a peace, I decided to try and make ones. There are marks behind the cap (as seen on preview), so it's easy to align the parts. Just add a drop of glue to the centre. Those backside parts work as springs, like in the original part.