Audi (2025+) “RITUALS…” Air Freshener Holder / Vent Clip – A6 e-tron tested - image

Files (1)

rituals_holderv3.stl

STL

222.1 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
rituals_holderv3.stl	Mount / bracket	222.1 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper ventilation during printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Audi (2025+) “RITUALS…” Air Freshener Holder / Vent Clip – A6 e-tron tested

0 downloads225 views0 likes

Shared by

Michael Chen

Verified

Description

This is a custom-designed holder for the RITUALS… car air freshener, made to fit the Audi A6 e-tron (2025) air vent. ✅ Tested on: Audi A6 e-tron (2025) ⚠️ Might fit: Audi A5, Q5, A6 (2025–) (same/new vent style) — please comment if you confirm compatibility. The holder keeps the freshener centered and stable on the vent, without looking “aftermarket”. Prints easily without supports (depending on orientation) and works great in PETG for heat resistance.