Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 40% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| AudiChildSeatCover.stl | Cover / cap | 524.7 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and supports likely. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Audi A6 Child Seat Latch Cover
Shared by
3DPrintedCarPartDescription
Any Audi owner knows that these covers aren't designed well. They don't stay clipped on. I designed this in Fusion 360 with a tighter clip. You may have to scale it up or down a percentage point or two to get it exactly right. The part requires supports. I chose to print it on its side so the face is not marred. You will have to do some light sanding where the supports were. I printed it at 100% infill since it will probably slice that way anyways. Hope it works for you.
Compatible Cars
Originally published on thingiverse.com by Al Bravo (AlBravo) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
