Audi A2 Becherhalter - cup holder preview

Files (1)

Becherhalter_B.stl

STL

1.5 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Becherhalter_B.stl	Primary model	1.5 MB STL	Slice file	Slice file	Slice file	Ensure a secure fit on the center console to avoid scratches

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Audi A2 Becherhalter - cup holder

0 downloads19 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA for durability in a car environment

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for a balance between strength and weight

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

Public Domain

Commercial use allowed

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Audi A2 cup holder - Becherhalter Becherhalter für die Mittelkonsole des Audi A2. Für Alleinfahrer. 79 mm Innendurchmesser. Teil B: Halter für Mittelkonsole (auch für Rechtslenker) Teil A: Becherhalter 79 mm Innendurchmesser mit Ausschnitt für den Henkel Verbunden mit Schwalbenschwanz - fest Legoähnliche-Platte oben für Handyhalter usw.... zum Selberbauen. Der Halter hält allein durch seine Form und kann sofort abgenommen werden. Die Mittelkonsole könnte Kratzer abbekommen, was bei meinem Soft Lack egal ist aber ihr könnt ja ein Stück Stoff unter den Halter kleben. Audi A2 Cup Holder Cup holder for the Audi A2 center console. For single-occupant vehicles. 79 mm inner diameter. Part B: Mount for center console (also for right-hand-drive vehicles) Part A: Cup holder, 79 mm inner diameter, with cutout for the handle Secured with a dovetail joint—firmly attached Lego-style plate on top for cell phone holders, etc.... for DIY assembly. The holder stays in place solely due to its shape and can be removed immediately. The center console might get scratched, which doesn’t matter with my soft paint finish, but you can always stick a piece of fabric under the holder. printed with PLA.