Cupholder Audi A6 C4 Bj. 1994-1997 - image

Files (3)

Cupholder_Audi_A6_C4.stl

STL

390.8 KB

Cupholder_Audi_A6_C4_Part1.stl

STL

498.1 KB

Cupholder_Audi_A6_C4_Part2.stl

STL

274.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cupholder_Audi_A6_C4.stl	Mount / bracket	390.8 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft for better adhesion if necessary
Cupholder_Audi_A6_C4_Part1.stl	Mount / bracket	498.1 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft for better adhesion if necessary
Cupholder_Audi_A6_C4_Part2.stl	Mount / bracket	274.5 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft for better adhesion if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Cupholder Audi A6 C4 Bj. 1994-1997

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a Cupholder for Audi A6 C4 Bj. 1994-1997. (center console) I made this for my Audi, but all other Cupholder was realy bad, they are fund in the i-Net. Have Fun with it.