Files (2)

part_1.stl

STL

1.0 MB

part_2.stl

STL

1.7 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
part_1.stl	Printable file	1.0 MB STL	Slice file	Slice file	Slice file	Use a clamp to join the two pieces together as instructed.
part_2.stl	Printable file	1.7 MB STL	Slice file	Slice file	Slice file	Use a clamp to join the two pieces together as instructed.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Coyote holder for Audi A6 2020

0 downloads48 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Coyote holder for the audi A6 from 2020. It fit into the key holder between the two cups holes. You need to use a clamp to join the 2 pieces together. There is a little hole on the right part of the piece to add a screw. This screw will be use to securely lock the position.