Audi A3 A4 A5 A6 A7 Wabengrill Emblemhalterung honeycomb grille badge holder - image

Files (4)

Halter_links.stl

STL

1.2 MB

Combined.stl

STL

2.0 MB

Halter_rechts.stl

STL

1.2 MB

Waben.stl

STL

253.6 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Halter_links.stl	Printable file	1.2 MB STL	Slice file	Slice file	Slice file	Use a brim or raft for better adhesion if necessary
Combined.stl	Printable file	2.0 MB STL	Slice file	Slice file	Slice file	Use a brim or raft for better adhesion if necessary
Halter_rechts.stl	Printable file	1.2 MB STL	Slice file	Slice file	Slice file	Use a brim or raft for better adhesion if necessary
Waben.stl	Printable file	253.6 KB STL	Slice file	Slice file	Slice file	Use a brim or raft for better adhesion if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Audi A3 A4 A5 A6 A7 Wabengrill Emblemhalterung honeycomb grille badge holder

1 downloads229 views0 likes

Shared by

Michael Chen

Verified

Description

Mit diesem Thing kann man das Audi Logo an einen Nachbau Wabengrill ohne Emblemhalterung montieren. Die Halterung besteht aus 3 Einzelteilen: Als Druckmaterial sollte auf PLA wegen schlechter Temperaturfestigkeit verzichtet werden. Besser wäre zum Beispiel ABS oder PETG. Zuerst müssen die zwei Halterungen mit einem 2K-Kleber zusammengefügt werden und dann können die Waben eingeclipst werden. ODER es wird das kombinierte Teil gedruckt.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Audi A3

Published Feb 13, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.