Audi B9 A5 S5 Aftermarket Grille Camera Mount Remix 1 - image

Files (1)

Audi_B9_A5_S5_RS5_AftermarketGrille_CameraMount_Remix1_v30.stl

STL

254.2 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Audi_B9_A5_S5_RS5_AftermarketGrille_CameraMount_Remix1_v30.stl	Mount / bracket	254.2 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper orientation for optimal strength and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Audi B9 A5 S5 Aftermarket Grille Camera Mount Remix 1

2 downloads354 views0 likes

Shared by

Michael Chen

Verified

Description

This is a 3D-printable front camera mount for an Audi A5/S5 (B9 chassis) for the RS-style grille sold by "German Car Accessories" in 2020. This is slightly based on the design shared by s5ecific on audiworld.com with some changes: Angled down further to match Audi original camera angle (20 degrees instead of 15). Camera moved forward and down to clear grille elements for 180 degree view. Optimized for 3D printing. See printing notes. Uses original Audi screws for mount, no additional hardware needed.