Files (1)

Georg.stl

STL

410.5 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Georg.stl	Primary model	410.5 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

screw for the trunk cover (A5)

0 downloads191 views0 likes

Shared by

Michael Chen

Verified

Description

Temporary plastic retaining screw for the trunk cover (Audi A5 Sportback). Used only as a provisional solution until the original OEM part is available.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Audi A5

Published Feb 13, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.