Audi A3 adapter for Belkin Phone Mount - image

Files (1)

AudiPhoneMountV4.stl

STL

275.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
AudiPhoneMountV4.stl	Mount / bracket	275.2 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Audi A3 adapter for Belkin Phone Mount

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I remixed this from the original because the cross in the middle was too thick and the hole was too deep for my particular mount. It works very well, and is super sturdy. Just wiggle the two center vents out and re-install over this adapter. Printed from ABS to withstand being in a car on a hot summer day.