Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Mittelkonsole_A3_eng.stl | Printable file | 1.1 MB STL | 29g $0.70 | 32g $0.77 | 70g $1.68 | Print with the top side down as recommended by the designer |
| Mittelkonsole_A3_weit.stl | Printable file | 1.1 MB STL | 29g $0.71 | 32g $0.77 | 70g $1.68 | Print with the top side down as recommended by the designer |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Audi A3 S3 RS3 8Y GY Key and Card Holder
Shared by
3DPrintedCarPartDescription
This is a remix of the great cup holder replacement by "itsyourproduct": Changes made: - THIS REMIX ONLY FITS THE SHOWN 3 BUTTON KEY! (As found on the new generation A3) If your car has the 3 buttons with two side by side (for example A4), check out the original design. - one less card slot to make some space for the thicker key - removed the top (decorative) edge, to make it easier to print - Two versions: - "Eng" fits only your vehicle key, - "weit" fits your vehicle key and up to two "regular" thickness door keys (5mm more space). Print top side down, support if nesseccary (i found that i did not need any supports).
Compatible Cars
Originally published on thingiverse.com by Philipp S (AramcoPhil) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
