Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Audi A6 C7 smartphone, key, card and coin holder - Ash Tray replacement V2
Shared by
3DPrintedCarPartDescription
Why this design? ============== As I got my Audi A6 with keyless go, I usually tend to loosen my keys inside the car. Also, there have been some annoying processes like using a card to enter the parking lot area. Since I had to deal with a used car being equipped with a ash tray, I decided to go and talk to a couple of car owners in a german forum (motor-talk, thanks to those guys for the input) and we made a study of what is needed to be done. I then came along with this particular design. What are the core features? ======================= • just insert or remove smartphone and coin holder on demand • holds the car key • holds your smartphone (fixed via magnets, old design was using pins) • Holds any type of cards • Holds (european) coins, may work for other currency’s as well.
Compatible Cars
Originally published on thingiverse.com by Thomas Zipf (itsyourproduct) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
