Files (2)

clip_dos_renfort_.stl

STL

57.1 KB

clip_renforcé_v2.stl

STL

68.5 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
clip_dos_renfort_.stl	Clip	57.1 KB STL	Slice file	Slice file	Slice file	Use a brim or raft for improved adhesion
clip_renforcé_v2.stl	Clip	68.5 KB STL	Slice file	Slice file	Slice file	Use a brim or raft for improved adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Audi A4 B6 mirror clip

0 downloads233 views0 likes

Shared by

Michael Chen

Verified

Description

This is to replace a mirror clip for an audi A4 B6, year 2002. I lost the metal part so this is a full replacement of the part. You could add double side tape to block the mirror better. The v2 is more adjusted and more resistant, print 100% I used PLA volcano to enhance the durability. I put a support for in ideamaker, just at the end of the boucle, no need to put one in the center.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

2002 Audi A4

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files