Audi A6 C7 Front Door Speaker Adapter 8in - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

Audi A6 C7 Front Door Speaker Adapter 8in

0 downloads34 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a front door speaker adapter for a Audi A6 C7 to allow a replacement of factory to a 8" Shallow Speaker/Sub Woofer. I was able to fit a MB Quart DS1-204 8 Inch Shallow Sub in the door. Could use on other speakers, The depth of the speaker will be the main concern. The Mounting Depth of the MB Quart DS1-204 is 2.8" And that is a very tight fit. The Factory door screws will work for mounting the adapter. You will need M4x25 screws for mounting the speaker to adapter.