Files (1)

vent_gauge.stl

STL

7.5 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
vent_gauge.stl	Primary model	7.5 MB STL	Slice file	Slice file	Slice file	Ensure proper fitment around the gauge and air duct

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

Audi B6 Vent Pod 52mm

0 downloads53 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is pod for the boost gauge in my 2005 Audi A4 B6. I couldn't find anything created for this car to mount a gauge and I didn't want to buy the replacement vent with the gauge in the centre. To install the vacuum line and power to the pod, I drilled a 1/4" hole through the air duct to feed the lines up through. I had to wrap my actual gauge with a couple layers of tape for it sit snug.