Files (5)

Audi_S4_Support.stl

STL

158.5 KB

Audi_B4-S4_-_Left_CAP_v2.stl

STL

318.1 KB

Audi_S4_Right_cap.stl

STL

1.0 MB

Audi_S4_Left_cap.stl

STL

1.0 MB

Audi_B4-S4_-_Right_CAP_v2.stl

STL

318.1 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Audi_S4_Support.stl	Printable file	158.5 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
Audi_B4-S4_-_Left_CAP_v2.stl	Choose left variant	318.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Audi_S4_Right_cap.stl	Choose right variant	1.0 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Audi_S4_Left_cap.stl	Choose left variant	1.0 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Audi_B4-S4_-_Right_CAP_v2.stl	Choose right variant	318.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Audi S4 B5 washer cap

0 downloads191 views0 likes

Shared by

Michael Chen

Verified

Description

A friend asked me if i can create a new Washer cap for his Audi. Turned out that he has one of the caps but it was broken. Got the source and started to draw it in Fusion 360. In the middle of the process found out that the whole washer cap is not even symetrical. You can't do it with straight lines so need to be drawn more precisely . Turned out that there was a model here in thingivers, but its not even close to the original design. This one is almost as identical as the original cap . You still need to use sand paper and maybe some filler but it as a good one.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Audi S4

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.0K

License: CC BY

View & download STL files