Audi Sunvisor Clip Replacment part - image

Files (1)

Sunvisor_Clip.stl

STL

85.2 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Sunvisor_Clip.stl	Clip	85.2 KB STL	46g $1.10	50g $1.20	110g $2.63	Print with the hook looking up and with support in contact with the bed if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Audi Sunvisor Clip Replacment part

0 downloads204 views0 likes

Shared by

Michael Chen

Verified

Description

It works with most AUDI cars !!! I designed a sunvisor clip for my Audi A3 as the clip was broken (see pictures). The printed part works exactly as the original one. You have to reuse the grey case and the small iron part. It is very easy to change, just follow theses steps according to the pictures : 1) Print the stl file as it is, hook looking up and with support in contact with the bed. While it is printing, remove your broken sun visor clip thanks to slotted screwdriver. 2) Take printed part and remove supports.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Audi A3

Published Feb 13, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.0K

License: CC BY

View & download STL files