Files (1)

Thermoskannenhalter_Audi.stl

STL

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

Based on 25% main infill across listed model files

Material cost

$0.22

Filament only at roughly $24/kg PETG / ASA

Print time

15m–26m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Thermoskannenhalter_Audi.stl	Primary model	0 B STL	8g $0.20	9g $0.22	20g $0.47	Check the orientation and support settings in your slicer for optimal results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Cup Holder for Audi A3

2 downloads592 views0 likes

Shared by

Alfred

Verified

Description

Hey, this is a Cup Holder for an Audi A3. You need only manuell support on the left side. The two holes are for zip tiles. (If you need)

Print Settings Printer brand: Creality

Printer: Ender 3

Rafts: Doesn't Matter Supports: Yes Resolution: 0,3

Infill: 20

Filament brand: Sunlu

Filament material: PLA.

Print Settings

Material: PLA

Infill: 20%

Supports: Required

Bill of Materials

Hardware, filament, and supplies to check before printing this part.

PLA filament

Qty Enough for one print

Required

Match diameter and temperature range to your printer before ordering.

Buy / source

Some purchase links may become affiliate links. Confirm dimensions, fitment, material limits, and safety before buying or installing anything in a vehicle.