Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Audi TT 8N - 60mm vent gauge pod mount
Shared by
3DPrintedCarPartDescription
This item allows you to fit 60mm gauge into ventilation port in your Audi TT 8N. instruction: 1. Remove the original air vent 2. Separate the aluminium ring from it 3. Put your gauge into the new printed vent 4. Glue in the ring to the printed vent 5. Mount it in the vent hole DO NOT USE THE PLA, use PETG or ABS instead, as PLA might shrink by the high temperature of the dashboard. WARNING: It is required to use some sand paper in order to make the gauge fits snuggly into the print. It happens that some of 60mm gauges are slightly different than the others. It can be easily modified for 52mm gauges just by decreasing the size of internal hole.
Compatible Cars
Originally published on thingiverse.com by Marcin Wach (WachuTT) · License: All Rights Reserved
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
