Auto trim / retainer clip - From Subaru Door trim - image

Files (2)

SubaruTrimClip1.stl

STL

1.5 MB

SubaruTrimClip2.stl

STL

1.0 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
SubaruTrimClip1.stl	Clip	1.5 MB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary
SubaruTrimClip2.stl	Clip	1.0 MB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Auto trim / retainer clip - From Subaru Door trim

0 downloads50 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Designed a few clips to hold the external door trim on a Subaru Legacy (2005). These clips probably would work for other applications with similar dimensions. 13mm high (entire clip), fit a 9mm hole. Clip 1 has an oblong base. Clip 2 has a rectangular base.