Better C7 Corvette Cupholder Divider - image

Files (2)

C7_Cupholder_Divider.stl

STL

477.3 KB

C7_Cupholder_Divider_with_Can_Side.stl

STL

167.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
C7_Cupholder_Divider.stl	Mount / bracket	477.3 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary
C7_Cupholder_Divider_with_Can_Side.stl	Mount / bracket	167.5 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Better C7 Corvette Cupholder Divider

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I found the cupholder divider in my C7 Corvette to be awful. It didn't stay in place and made it practically useless for holding a drink. Because of this, I went down a path of designing a better divider that worked with zero modifications to the car. Just pop the old one out, toss it in the trash, and clip the new one in. I wound up designing an additional version as well that has one side sized appropriately to hold a can, while the other is the stock size and better for a tumbler or to go cup. Unfortunately, I have no photos around from when I originally printed mine. It became a bit longer of a testing period than I originally intended.