Files (1)

Corvettekopholder_A2.stl

STL

2.9 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Corvettekopholder_A2.stl	Mount / bracket	2.9 MB STL	Slice file	Slice file	Slice file	Print with the open side down to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Corvette C3 Cupholder

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I made this cup holder for a 1969 Corvette Stingray (C3). It mounts to the center console using two already existing screws. It does not interfere with the handbrake. It's a pretty snug fit, and with the screws tightened, it's very stable. I designed it to hold a general variety of containers, eg. a 33 cl. can, but specifically to perfectly fit a Bodum thermos. I printed it in one piece, upside down without supports. Note that the holes for the mounting screws are offset slightly to the back, i.e. closer to the back than to the front when properly mounted. UPDATE: I have to share the Fusion360 file for your convenience. https://a360.co/2ZzjbqQ Follow the link and you will be able to download the model in a variety of file formats.