Files (1)

stoppel.stl

STL

70.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

12g

Based on 25% main infill across listed model files

Material cost

$0.29

Filament only at roughly $24/kg PETG / ASA

Print time

21m–34m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
stoppel.stl	Primary model	70.6 KB STL	11g $0.27	12g $0.29	26g $0.63	Scale the model if necessary to fit your specific blend valve cover

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

blend valve cover plug

0 downloads22 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Blend valve cover plug English My car came to me with a dealer fitted air-conditioning, one of the modification which was done back then was an additional opening in the blend valve top cover for the small side vents in the dash board. Since his opening is no longer need with an ElectroCooler installed I designed this plug to shut this hole. Diameter is 35,5mm. You might what to check if this is the right size for you and scale it accordingly. I did use PETG in black as printing material with the standard setting: heat bed temp 70°, nozzle temp 230° ----------------------------------------------------------------------------------------------------------------------- Deutsch: Mein Auto war mit einer vom Händler installierten Klimaanlage ausgerüstet als ich es gekauft habe. Eine der Modifikationen war eine zusätzliche Öffnung in der oberen Abdeckung des Steuerkastens (Frischluft/Heizung) für den Anschluß der seitlichen, kleinen Lüftungsöffnungen im Armaturenbrett. Da diese Öffnung beim ElectroCooler nicht benötigt wir habe ich einen Stoppel entworfen. Der Durchmesser beträgt 35,5mm. Bitte vergewissere dich dass dieser Durchmesser der richtige für dich ist, andernfalls kannst du die Größe über die Skalierfunktion anpassen. Als Druckmaterial habe ich PETG in schwarz verwendet. Druckeinstellungen Standard: Bett 70°, Drucktemperatur 230°.

Compatible Cars

Porsche 911

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Stefan Hollaus (austria3) · License: CC BY-SA

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.