Porsche Macan EV Center Armrest Tray - image

Files (3)

base_tray.stl

STL

13.6 KB

kleenex_passthrough.stl

STL

44.2 KB

honeycomb.stl

STL

83.1 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

3 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
base_tray.stl	Accessory piece	13.6 KB STL	13g $0.31	14g $0.33	31g $0.73	Small functional file: print slowly; consider 80–100% infill for durability.
kleenex_passthrough.stl	Printable file	44.2 KB STL	15g $0.37	17g $0.40	36g $0.87	Ensure a clean and level print bed for optimal adhesion
honeycomb.stl	Printable file	83.1 KB STL	18g $0.43	20g $0.47	43g $1.03	Ensure a clean and level print bed for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Porsche Macan EV Center Armrest Tray

1 downloads212 views0 likes

Shared by

Michael Chen

Verified

Description

I want to share a slight modification I made to the center armrest storage area for the Porsche Macan EV. I only put little knick-knacks in there like my work badge or car wash coupons, but since the storage is really deep (7 inches to be precise), it feels unnatural to reach so far down for my items. Additionally, I felt like a lot of the volume in the storage space goes to waste because unless I'm putting something that is 7 inches inside, the top portion is just empty air. I came up with a simple tray design. I noticed the storage area is narrower at the bottom, so the idea is for the tray to take advantage of that narrowing and create a shape that can be held in place by friction. Installing this tray will allow for a second level of storage as well as putting my knick-knacks within easier reach. When installed the tray will sit just above 5 inches from the bottom, allowing for you a cubed Kleenex box to fit underneath. I got this idea from Tesla, which has a 2-level storage system for the center armrest (although the implementation is a bit different). I've included a few different designs for this tray, based on feedback I received from the Macan EV forum members.