Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Sun_Visor_for_MK1.stl | Primary model | 16.3 MB STL | 46g $1.10 | 50g $1.20 | 110g $2.63 | Ensure proper orientation in slicer for optimal print quality |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
VW MK1 Scirocco Sun Visor
Shared by
Michael ChenDescription
This is a replica of the sun visor clip that fits many VW, Audi and Porsche MK1 Designed after VW Part# 171857559 This one is designed where the distance between the edge of the screw hole and the connection insert is 25mm. VW had several variations of these clips with size differing between the screw hold and the insert. If you need a one with a different size, please contact me. (see the picture on how to measure yours). Use PETG or other filament that doesn't shrink or warp. Note: In very hot climates, this could still deform. 3D printing isn't has hard/rugged as hard molded plastic.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
