BMW 3 & 4 Series F32 F31 F32 F36 LCI cup holder insert preview

Files (1)

BMW F32 Cup Holder Phone Mount.stl

STL

683.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / TPU 20%	PETG / TPU 25%	100% solid	Recommendation
BMW F32 Cup Holder Phone Mount.stl	Mount / bracket	683.6 KB STL	Slice file	Slice file	Slice file	Verify final orientation and support decisions in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

BMW 3 & 4 Series F32 F31 F32 F36 LCI cup holder insert

0 downloads30 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or TPU for flexibility and durability

Print time

Slice to calculate

Filament

Slice to calculate

Supports

supports unlikely

Infill

20-30% infill for a balance between strength and flexibility

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

Public Domain

Commercial use allowed

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is an insert to fit into the BMW 3 & 4 series F30 F31 F32 and F36 LCI center cup holder. This is the version with the sliding door, not the one you have to take out and put in the glove box. I set my phone into the cup holder, but it can rattle around so I made this insert. It has a cut out for my phone size, and camera lenses (Samsung Galaxy Fold 4), but should be adaptable to others. Hopefully the step or stl files can be imported and amended. It was made as a parametric model in OnShape. This is my first parametric design, so hopefully it's all ok. I printed it in NinjaFlex TPU, but it should be fine in any material. Standard print profiles, no supports needed.