Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 75% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| RALCruiseControlSwitchBlock12final.stl | Primary model | 66.2 KB STL | Slice file | Slice file | Slice file | Use a 0.25mm nozzle for accuracy. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
BMW Cruise Control Button "2nd Click" Stopper Cap for Bootmod3 Antilag
Shared by
3DPrintedCarPartDescription
To prevent accidently pressing the cruise control button up 2 clicks instead of 1 click when engaging rolling antilag as reported by an amount of Bootmod3 users. Filing/sanding might be needed depending on how much play your CC button gives. Recommended Print Settings: - 0.1mm layer height. - 50-100% Infill (using a 0.25mm nozzle is highly recommended for accuracy.).
Compatible Cars
Originally published on thingiverse.com by Mike Dio (dio300) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
