E30Lueftungsgitter_v1.stl

STL

349.4 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
E30Lueftungsgitter_v1.stl	Primary model	349.4 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper fitment before printing by checking dimensions against your dashboard.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

BMW E30 gauge vent for AEM

0 downloads178 views0 likes

Shared by

Verified

Description

BMW E30 gauge vent mount specifically modified for 52mm AEM gauges. Replaces factory vent for clean gauge installation in dashboard.

Time: 2h

Filament: 50g

Supports: Not needed

Published Feb 14, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

License: CC BY