Files (1)

BMW_E36_CupHolder.stl

STL

521.8 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BMW_E36_CupHolder.stl	Mount / bracket	521.8 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure the print bed is level and clean for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

BMW E36 Cup holder

0 downloads293 views0 likes

Shared by

Michael Chen

Verified

Description

Removed top of original thing, so top would be flush with a panel This design is ready to be printed and mounted in a car. Remixed item was good starting point - on a next update will add one slot cup holder with a coin section and one similar with ant iqos holder. Also will try to implement lighting from ashtray to work with a cup hoder.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

BMW E36

Published Mar 12, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.