Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ACD.stl | Primary model | 44.2 KB STL | Slice file | Slice file | Slice file | Check final orientation and support decisions in your slicer |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
BMW E46 E36 Compact Parcel Shelf Support Bracket 8146708 51468146708
Shared by
3DPrintedCarPartDescription
Shelf support part left/right for E36 compact. not perfect, but it worked for me. For anyone who doesmt want to pay 20 EUR for a small plastic pin ABS filament is probably better for more strength, however, did mine in PLA and so far so good....
Compatible Cars
Originally published on thingiverse.com by Koan Neuer (KNeuer) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
bmw e46 316i cup holder
BMW E46
License: CC BY
View & download STL files
Cupholder for BMW E46
BMW E46
License: CC BY
View & download STL files
USB in place flashlight BMW E46
License: CC BY-NC-SA
View STL source
amplifier connector for BMW vehicle
License: CC BY-NC-SA
View STL source
BMW 51478146943
License: CC BY
View & download STL files
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
