Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 100%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

BMW e46 Sunroof Handle

0 downloads37 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Summary Designed and printed a sunroof handle for my e46 325xi because it was missing one. Found a single listing on eBay for a used one selling for $20 - um..no. hah. So I modeled one based on the pics - couple of prototypes later it was right. This friction fits, no gluing required, and is thin enough to allow the sunroof cover to fully retract when the glass opens all the way:) 2 STL files - one is blank, the other was for myself, it has the 325xi on it which i designed from scratch with Microgramma font to be as authentic as possible. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution:.16mm Infill: 100% Filament: Any PETG or ABS PETG Notes: Doesn't need supports if your bridging is decent. Print with the cavity facing downwards. I wouldn't use PLA because it's not quite water resistant, so PETG or ABS is fine.