Files (3)

mount-magsafe.stl

STL

116.9 KB

Mount1.stl

STL

331.8 KB

Mount2.stl

STL

53.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
mount-magsafe.stl	Mount / bracket	116.9 KB STL	Slice file	Slice file	Slice file	Flip the magsafe mount in the slicer so the flat part faces down for better adhesion
Mount1.stl	Mount / bracket	331.8 KB STL	Slice file	Slice file	Slice file	Flip the magsafe mount in the slicer so the flat part faces down for better adhesion
Mount2.stl	Mount / bracket	53.4 KB STL	Slice file	Slice file	Slice file	Flip the magsafe mount in the slicer so the flat part faces down for better adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

BMW F30 magsafe mount

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Remix made of kcassidy phone mount. I wanted to use the new iphones magsafe feature so made a new object that could hold a magsafe wall mount. For this you'll need something like https://www.bol.com/nl/nl/p/interwinkel-magsafe-wall-mount-muur-magneet-iphone-12-zwart/9300000022046880/ with a 7cm diameter. Mount 1 and 2 are the same as the original. I printed all my parts with PLA+ and 20% infill. For mount 2 are supports required. And it's preferable to flip the magsafe mount in the slicer so the flat part faces down. As for completing it, the same goes as the original. Some rubber strips are nice and sticky tape to hold it in place for the car side. As well as 2 M3 bolts. For some iphones you can also buy cases to get magsafe compatibility.