mobile phone holder for BMW vehicles - image

Files (3)

mobile_phone_holder_for_BMW_e90_-_basic_bracket.stl

STL

869.0 KB

mobile_phone_holder_for_BMW_e90_-_bed_for_Samsung_Galaxy_S4.stl

STL

330.2 KB

mobile_phone_holder_for_BMW_e90_-_bed_for_Samsung_Galaxy_S6_edge.stl

STL

338.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
mobile_phone_holder_for_BMW_e90_-_basic_bracket.stl	Mount / bracket	869.0 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping
mobile_phone_holder_for_BMW_e90_-_bed_for_Samsung_Galaxy_S4.stl	Mount / bracket	330.2 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping
mobile_phone_holder_for_BMW_e90_-_bed_for_Samsung_Galaxy_S6_edge.stl	Mount / bracket	338.4 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

mobile phone holder for BMW vehicles

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

As I bought my car there was an existing holder for a special mobile navigationsystem. The reasons for this project is simple: no more update for it! So I checked the possibilities to create a holder for my mobile phone and I disassembled the old one. After some measuring of the basic plate (picture 2 and 3) of the dashboard I started to design it in Fusion. The idea is to install two separated parts (you need only 4 countersunk screws with nuts M3 x 20 to fixed them together). The "bed" (I hope that the right word for it) is exchangeable. At the moment I created a version for a Samsung Galaxy S4 but it has some issues with the camera and the volume up button. Next version has an USB connector in the middle of the basic holder, and it's black. Update 2018-01-14: After some years I found the time to update this project with a bed for the Samsung Galaxy S6 Edge with a bumper like this: https://www.amazon.de/gp/product/B00SV635BG/ref=oh_aui_detailpage_o04_s01?ie=UTF8&language=en_GB&psc=1 Pictures will follow (It's hard to show the holder with the mobile phone if you have just one camera:-D )