Files (1)

BMW_Wiper_nut_cover.stl

STL

258.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BMW_Wiper_nut_cover.stl	Cover / cap	258.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

BMW Wiper nut cover

0 downloads66 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Replacement Windshield wiper arm nut cover for an BMW E36. I accidentally dropped one in the engine bay while working on the wipers. The cover was never to be seen again. Buying a new one costs about $15 for one ( yeah ok...) so I designed one. Its a tight fit so as to keep the moisture out. Used black ABS, sanded and wiped with acetone.