Files (1)

CPS_Spacer.stl

STL

30.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CPS_Spacer.stl	Primary model	30.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

M54 front mounted CPS spacer

0 downloads168 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Spacer to mount an M54 crankshaft position sensor (CPS) to the front timing cover on an M50/M52 engine. Created due to the m54 sensor being longer than the standard m52 version. This should result in a 0.8mm gap between the sensor and trigger wheel. This is to enable usage of MS43 harness and DME in different model BMWs.