Files (5)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| BMW_Z4_Angel_Eye_Inner_Lens_Holder.stl | Mount / bracket | 151.8 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer to minimize supports |
| BMW_Z4_Angel_Eye_Inner_Lens_Holder_XKGlow_v2.stl | Mount / bracket | 236.4 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer to minimize supports |
| BMW_Z4_Angel_Eye_Inner_Lens_Holder_XKGlow_v3.stl | Mount / bracket | 251.7 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer to minimize supports |
| BMW_Z4_Angel_Eye_Inner_Lens_Holder_XKGlow_v4.stl | Mount / bracket | 264.8 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer to minimize supports |
| ParkingBulbCover.stl | Cover / cap | 131.1 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
BMW Z4 E85 Angel Eye Headlight Adapter
Shared by
3DPrintedCarPartDescription
Angel Eye adapters I made for my 2003 BMW Z4 E85. As used in this (old and somewhat outdated) guide here: https://z4-forum.com/forum/viewtopic.php?t=100058
Compatible Cars
Originally published on thingiverse.com by James Tanner (IAmOrion) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
