Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 40% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Head_Light_Washer_Nozzle_Sprayer_Ball.STL | Primary model | 250.0 KB STL | Slice file | Slice file | Slice file | Ensure proper sealing to prevent water leakage |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
BMW Z4 Head Light Washer Nozzle Sprayer Ball
Shared by
3DPrintedCarPartDescription
A ball from my head washer just pop out when I activated it. So I made a new one taking the dimensions and replicating it on Solidworks. Depending on the finishing of your print maybe you will have to open the nozzle a bit with a drill or something similar to allow water to pass correctly. I made mine in PLA and glued it to the Sprayer with SIKA water resistant composite. My ball holder had a crack so the ball would fall with the first headlight wash.
Compatible Cars
Originally published on thingiverse.com by Carles Rodriguez Lopez (Chalster_Ego) · License: CC0
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
