Borbet B 15" rim center cap (VW) - image

Files (1)

borbet_b.stl

STL

319.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 25%	100% solid	Recommendation
borbet_b.stl	Primary model	319.5 KB STL	Slice file	Slice file	Slice file	Use a heat-resistant material due to exposure to sun and brake heat

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Borbet B 15" rim center cap (VW)

0 downloads24 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Bought a set of Borbet type B 15" rims and they where missing the center cap so i made some that will fit those cause the original ones are incredibly expensive so thats why i made a budget edition with volkswagen logo on it. leave comment if you want it with an another logo and i will upload it!:D. i made it to be fitted with a M6 allen bolt because i dont have a original bolt to take measurements from. EDIT: make this out of ABS or other heat resistant plastic cause PLA will warp due to heat from the sun or when you are breaking!!! NOTICE you will need washers under the cap where the bolt is to make it fit tight otherwise it will break or unscrew it self!