Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| bracket_filler.stl | Mount / bracket | 84.5 KB STL | Slice file | Slice file | Slice file | Ensure proper bed adhesion to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Brace for Tesla Model 3 Reinforcement Part #14
Shared by
3DPrintedCarPartDescription
I was removing panels in the Frunk area near the 12 Volt battery/air inlet. I found Part Number 1131205-00-C >PP-GF20< (#14), broken and seems to be poorly designed. The Assembly, which has two parts is joined by a (3) very slim silvers of material which its not structurally strong enough to hold up to pushing a panel fastener in and not allow the panel to be fully fastened. You may what to check yours (theirs (2) of them. (Needs to be redesigned) See posting https://teslamotorsclub.com/tmc/threads/frunk-reinforcement-part-failure.157170/#post-5014826
Compatible Cars
Originally published on thingiverse.com by (hridge10) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
