Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Bronco 6G Pod Light Bracket
Shared by
3DPrintedCarPartDescription
This is a pod light bracket for the Ford 6G Bronco. I've included a DXF for the top plate to be made out of.250" aluminum or steel. Two bottom 3-D print spacer STL's. The short one is for the threaded quarter inch top plate. The taller extended version is to be used with a backing nut. I have added new spacers with.030 removed from the step. Check to see which one will work best. The two Bronco bolts have different head and torx (T25 and T30) size but the thread size is the same for both M6 x.1 mm the T 30 is longer than the T 25, if you swap the screws with the holes they came in you don't need to replace your bolts. If you want to replace your bolts they are M6 x.1 mm x 25 mm long will work. *Thingiverse has a problem with downloads. So go to the thing files and download them individually for best success.*
Compatible Cars
Originally published on thingiverse.com by Jim Audette (vlxjim) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
