Files (1)

bmw_k100_button_box_4-29-15.STL

STL

222.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
bmw_k100_button_box_4-29-15.STL	Primary model	222.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

button box for Bmw vehicles

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I have a 1987 bmw k100 RT that went on a diet and had the right hand cluster/starter kill switch be intermittent. The front end has clip ons and the original gauge cluster mounted lower. This part holds the Key switch/ and four other switches. Switch holes are 11.75 MM, key switch is a generic blade style. I'll probably change out the switches and key but it fits the forks well thus far.