Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 10% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Dash-Mount-v1.0.stl | Mount / bracket | 376.0 KB STL | Slice file | Slice file | Slice file | Use heat inserts for secure screw attachment |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
C7 Corvette dash mount
Shared by
3DPrintedCarPartDescription
This is a rugged dash mount for a 2014-2019 C7 Corvette. It uses the AMPS screw pattern to attach accessories and I used ProClip mounts to attach a RasPi running OpenAutoPro. I used PLA because it's all I have but the design is reinforced and using higher walls, infill, and a stronger infill pattern it has survived the Florida summer heat so far. I used heat inserts to screw into for support. The metal loops are garage door visor holders cut shorter for the portion that goes under the dash. I put some felt on the bottom to protect the dash from it sitting on it. Garage Door Remote Visor Clips https://smile.amazon.com/gp/product/B07RK4CBVV Heavy Duty Tilt-Swivel https://www.proclipusa.com/product/tilt-swivel-mount-with-amps-face-plate-heavy AMPS Device Mounting Adapters https://www.proclipusa.com/product/amps-device-mounting-adapter
Compatible Cars
Originally published on thingiverse.com by Leith Tussing (brentil) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
